Hifax TYC 1190P 3004 BLACK high melt flow, 1,600 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has a very good balance of properties and processability. It is typically used for molded-in color automotive bumper fascia applications.
Hifax TYC 1190P 3004 BLACK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 25 g/10 min |
| Density (23 °C) | 1.01 g/cm³ |
| Flexural Modulus (23 °C) | 1600 MPa |
| Tensile Stress at Yield (23 °C) | 17 MPa |
| Tensile Strain at Break (23 °C) | >500 % |
| Charpy Impact Strength - Notched (23 °C) | 55 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications